Friday, 13 September 2013

Why We Never Dedicate a NIC Port to a VM

We never dedicate a NIC port to a VM. We always _team_ NIC ports. Generally there are two teams in standalone and cluster setups.

Team0: Management (Port 0 on NIC 0 and 1)

Team 1: vSwitch (Ports 1+ on NIC 0 and 1) – Dedicated

I kinda understand the logic of doing that, that is dedicating a NIC port to a VM. However, the whole purpose of virtualization is to separate the guest operating system from the hardware. So, one needs to break from that mindset.

There is no reason why the dual Intel quad-port configurations (8 ports total with 6 for the vSwitch) we do would have a problem with the in some cases 20+ VMs running on the host.

Team configuration exception to the rule would be for CAD/CAM/High Bandwidth needs:

  • Team0: Management (Port 0 on NIC 0 and 1)
  • Team1: vSwitch High I/O (Port 1 on NIC 0 and 1)
  • Team2: vSwitch General VMs (Ports 2+ on NIC 0 and 1)

That leaves a dedicated pair to the higher network bandwidth VM or VMs. We would leave VM density on Team1 at two or three maximum.

BTW, in a disaster recovery scenario having things teamed makes recovery a lot simpler. Trying to keep track of all of those vSwitch names mapped to what VM would be a real PITA when things were tense. Plus, getting all that configured would be that much more time wasted getting things back. Keep It Simple Sir

Oh, and one more thing: Why would one use a dedicated physical port on each node in a cluster for a highly available guest hosted on that cluster?

That leaves a single point of failure and yet we see that it is quite common for NIC teaming to not be used.

With NIC teaming now built into Windows Server 2012 RTM and newer there is no real reason to avoid teaming NICs or NIC Port groups to avoid that single point of failure.

So, when architecting a cluster setup please use NIC Teaming.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

Chef de partie in the SMBKitchen
Find out more at
www.thirdtier.net/enterprise-solutions-for-small-business/

Windows Live Writer

4 comments:

  1. Phil,

    I presume this is specific to W2012 and not W2008R2?

    ReplyDelete
  2. Matt,

    This is the rule we use for _all_ virtualization configurations no matter the platform.

    NIC teaming is a requirement in our books to eliminate that SPF on the networking side.

    Thanks,

    Philip

    ReplyDelete
  3. Interesting... So you used proprietary teaming software pre-2012?

    ReplyDelete
  4. Correct. We used prosetcl.exe that Intel published around v15.2.

    Philip

    ReplyDelete

NOTE: All comments are moderated.