We ran into a bit of a question mark around updating the SAS HBAs (Host Bus Adapters) in our Scale-Out File Server nodes. The question being how do we update all of the SAS HBAs in the server without having to take things a part physically.
When looking at the HBA.NSH file that comes with the firmware update for EFI Shell we see the default command line in the batch:
- sas2flash -f Intel\gb.fw -b mptsas2.rom -b x64sas2.rom
A quick search on the SAS2Flash utility and we found the LSI manual here:
- LSI SAS2Flash Utility Quick Reference Guide (Direct link to PDF)
In the guide we find what we need:
- sas2flash -fwall Intel\gb.fw -b mptsas2.rom -b x64sas2.rom
Once we power cycled through POST and CTRL+C into the HBA BIOS we saw:
Happiness is not having to pull apart the server systems to update things one at a time!
Philip Elder
Microsoft Cluster MVP
MPECS Inc.
Co-Author: SBS 2008 Blueprint Book
Chef de partie in the SMBKitchen ASP Project
Find out more at
Third Tier: Enterprise Solutions for Small Business
No comments:
Post a Comment
NOTE: All comments are moderated.