Saturday, 2 June 2007

Windows Vista - Network file copy to workstation performance issues

Just a quick note to let you know that there is a recognized performance issue in Windows Vista when copying files from a network source to the local workstation.

You may see a "Calculating Time Remaining" message indicating "0 minutes remaining" and get nowhere with the process.

If you are having issues with this, then there is a Knowledge Base article and a hotfix for you!

Microsoft KB931770: The copy process may stop responding when you try to copy files from a server on a network to a Windows Vista-based computer.

Give Product Support Services a call for the hotfix!

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

TroubleShooting: Client lost Dell image disks? Request them back...

Dell actually has a request the backup disks page.

The disks will contain the factory-installed OS and device drivers.

From the Dell site:
  • Requests are limited to one (1) set of backup discs per system purchased.
  • The backup discs requested must match the operating system that was factory installed on the original order.
So, if you have clients with missing disks, here you go: Dell: Request Backup Disks.

You will be required to fill out a form. Not sure if there will be a nominal cost involved.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Friday, 1 June 2007

Blog access outage...

We are still in the process of refining our Internet facing servers.

As a result, we experienced an outage on our blog access due to no access to our primary DNS servers.

We are making changes to our DNS topology to avoid that in the future.

Our apologies for any inconvenience.

We live and learn. :*)

Update: Changed "experiences" to "experienced".

Also, looking at the logs, the issue might have been internal here as there doesn't seem to be any real break in the blog visit times, or the problem had just started to show itself.

It bears further investigation. :D

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

System Builder Tip: Vista Aero Performance Rating - ATI X1250 on AMD 690G Chipset

A while back, we went to the AMD/Microsoft TechTour which offered us a Tour Bundle at a discount over purchasing through distribution.

According to the coupon we received to redeem for the bundle, we were to get an AMD X2 4400+, Asus M2A-VM AM2 series motherboard, a copy of Windows Vista Ultimate NFR, and a one year subscription to McAfee's security product *cough*. ;0)

We decided to take a risk and purchase the bundle.

This is the first time in over five (5) years that we have purchased anything AMD!

Why? Because, we were burned so badly by a number of AMD based systems back then that we never turned back. We had to fight with the motherboards to work with any add-in cards like network or video for example. Or, we had to fight to get the drivers to work properly or the system to run stable at all. There were a number of times we were replacing components or motherboards to get things to play together nicely. Any so-called cost savings was obliterated by the time fighting with the systems.

So, that was that. Remember the three strike rule? :D

And here we are, with the processor, motherboard, some Kingston RAM, a couple of 320 GB Seagates setup in a RAID 1 array and having just finished installing Windows Vista Ultimate.

All in all, the install went smoothly.

The one glitch we ran into was getting Vista to recognize the on board ATI X1250 video subsystem. Vista refused to. After fighting with it for about half an hour, we extracted the driver ZIP file, and went into the Device Manager and forced the driver to update via the Update Drivers button on the Standard VGA driver.

After a reboot the Standard VGA was still there, though the display setting was reset to 640 x 480. So, tried one more reboot and it worked. We now had Vista recognizing the video as an ATI X1250.

By the way, we had a bit of a struggle trying to figure out where to find the video driver in the first place. The lingo used on Asus' site didn't have anything labelled video. It only had what turned out to be one massive "chipset" driver:


Um, Intel's "chipset" drivers tend to be something like 2-3 MB. So, the only logical conclusion with a 149 MB download, is that Asus packages both the chipset and video drivers together.

That is a pretty chunky download by the way.

Here is the current Catalyst driver size:

A whole whopping 40 MB.

So, take 3 MB for Intel's chipset drivers and 40 MB for ATI's Catalyst drivers, and that leaves 100 MB+ of what exactly? Not too sure on that.

The first run at the Windows System Assessment Tool failed. That was after the first reboot post ATI driver install.

The Windows System Assessment Tool ran fine after the second reboot.

Here is how the ATI X1250 did:



Desktop performance for Windows Aero scored a 2.5 and the 3D business and gaming graphics performance scored a 2.8.

So, how does the on board ATI X1250 stack up to Intel's on board GMA 3000 series video chipset?

Not really that well I am afraid.

In our System Builder Tip: Vista Aero Performance Rating - Intel GMA 3000 on DQ965GF and ATI FireMV 2200 PCI-E,
the on board GMA 3000 series graphics ran a 3.9 score for Vista Aero and a 3.7 score for 3D Graphics.
Intel's 945GM chipset in a Toshiba Portégé M500 had a Desktop performance for Windows Aero score of 2.0 while the 3D business and gaming graphics performance scored 2.8.

For most users that use the Internet, e-mail, and perhaps Microsoft Office this performance level would be okay.

I think that the occasional gamer may be a bit disappointed in the ATI X1250 performance and go out and pick up at least an ATI X1600 or above to get better performance.

Please keep in mind that since this is our first foray into AMD in so many years, we are not exactly up on what's the fastest and newest stuff from them and those that manufacture their system parts. So, hopefully we won't need any flame retardant underwear! ;)

This particular box is going to be our test desktop mule for our SBS Cougar beta testing. So, it is going to get a lot of use, as well as tear downs. Hopefully it is up to the task.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Thursday, 31 May 2007

Windows Vista - Intel Matrix Storage Console

We are now getting into the habit of configuring all of our workstations with RAID 1 mirroring.

We have also managed to convince our clients that the small additional cost of the extra hard disk is worth it. So, most of our client desktops are also configured with RAID 1.

We just finished configuring a Vista Ultimate system on an Intel DQ965GFEKR with two 320 GB hard disks configured as a RAID 1 array.

Here is what we see after installing the Intel Matrix Storage Console in basic mode:


And, a shot of the Advanced Mode:


The Intel Matrix Storage also pops a message up just after logging into the system indicating that the hard disks are healthy. That little message can provide reassurance that our client's data is as safe as it can be. ;)

Of course, no data storage solution is complete without backups and folder redirection for redundancy! :D

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

SBS 2K3 - All Versions: Scheduling a reboot as a "just in case" when patching

Susan Bradley just wrote a post that is perhaps one of the best pearls of wisdom I have come across in a very long time: Brilliant idea regarding patching.

The following is the methodology for that idea.

I can't count the number of times that we have been patching Exchange, ISA, or even the server OS itself and we have been kicked off. No RWW access, no access via VPN.

The only respite in that case was, up until this point, to have someone log in and reboot the server, head down to the client site, or have a back door into the system.

So, how do we schedule a reboot?

It is actually very simple.

  1. Log on to the server as admin.
  2. Right click on the desktop and create a new text document.

  3. Call the new file something like, "Schedule Server Reboot.bat". Note the extension change to a batch file!
  4. Answer Yes to the warning that comes up.

  5. Right click on the new batch file and Edit it.
  6. Type the following in the batch file:
    • shutdown -r -t 30 -f
      • The -r is for Restart, the -t is the time delay for the restart with the amount of time expressed in seconds after it, the -f forces the shutdown no matter what service tries to deny it. This last one is VERY important.
      • You can change the time delay to whatever you want to. We suggest 30 to 90 seconds. This time setting is not the way to "schedule" the reboot by the way. Continue on for that.
  7. Go to Control Panel and then Scheduled Tasks.
  8. Double click "Add Scheduled Task".
  9. Click Next.
  10. On the "Click the program..." click on the Browse button.


  11. Navigate to the desktop, and click on your batch file, then the Open button.
  12. Perform this task: "One Time Only"
  13. Set the task to run an hour or more ahead depending on the updates you are running. To be on the safe side, add 50% more time to the time you come up with. Scotty's rule you know! ;)
  14. Enter your admin log on credentials.
  15. You will be greeted with the following:

  16. Click Finish.
If you get disconnected during the updates, wait for about 10 or so minutes after the prescribed time depending on how long your server takes to reboot, and you will be good to go! Hopefully that is. :*D

Susan, awesome tip! Thank you very much for sharing it as it solves a dilemma many of us would never even have come close to figuring out.

Kudos to the person who shared the tip with Susan!

UPDATE 2007-06-05: One thing that I missed with regards to the remote reboot!

Make sure to leave the Scheduled Tasks window open so that you can delete that scheduled task if you do NOT get kicked off your RDP session!

Otherwise, you will get a surprise when the scheduled reboot kicks in if you are still working on the server!

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Wednesday, 30 May 2007

Business Principles: Our personal health and our responsibility to our clients

As a small business ourselves, we tend to get really caught up in our client's needs and sometimes forget that we and our families also have needs.

When it comes down to it, our family should come first. Period!

Our responsibility as perhaps the sole I.T. infrastructure contact for our SMB clients is to keep in mind that we essentially hold their livelihood in our hands.

If we fail to provide a well planned infrastructure that can stand a catastrophic failure and bad things happen, how long can their business survive? One day? Two days? Maybe a week?

After said failure, how long will we survive? Probably not too long at all. Who would trust an I.T. company responsible for the demise of one of their clients?

Part of that responsibility is also in keeping ourselves healthy. If we are married and have kids, keeping healthy should be a given. Right?

If we don't keep ourselves healthy and something bad happens to us, where does that leave our families, employees, or clients? In a pretty bad place in my opinion. If we have employees, what about their livelihood?

Do we have a personal disaster plan in place that protects our families, employees, and our clients?

Do our clients have their network notes containing an audit of all of their equipment, serial numbers, software, licensing, and passwords in place? Could someone come into our client's location for the first time, pick up those notes, and know the essence of what was going on at the client site?

Do we have copies of those network audits in a safe place accessible to our lawyer if we happen to die?

Are we prepared? If we are not, then how can our clients expect us to prepare them?

It is very important to never take for granted that tomorrow will come! Our responsibility to our families, employees, and clients dictate that.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Tuesday, 29 May 2007

SBS 2K3 - All Versions: When setting up Remote Desktop Servers - a couple of important GP settings

We have a number of clients that we have setup remote desktops on dedicated rack mount and pedestal servers.

In some cases, we have just a 1U with XP Pro installed on. In others, we have a dedicated Microsoft Virtual Server 2005 R2 box serving three or more XP Pro or Vista Business desktops.

Whenever we need to setup the remote desktop environment at the client site, a couple of very important GP settings need to be implemented.

The first, is to remove the Disconnect button from the Start Menu:


This policy setting is implemented in the SBS Client Computer GPO.

In a multi-user scenario, if one user disconnects it leaves the remote desktop machine in a Locked state. If another user tries to log into the machine, they get a message warning them that someone is already logged on even though the previous user already disconnected.

As part of the user training, we let them know that they cannot log on to the remote desktop machine if they get that warning. We also train them to log off the system the same way they would at the end of the day on their laptops.

The second is to only allow the domain admin, and a test account if you use one, to have the ability to remotely shutdown the system.

This policy is implemented in a GPO we create and link at the domain level called, "Default Domain Security Policy" since the settings fall under the Security Options section in the GPO.

It would be very awkward if users who were used to shutting their system down when done did so with the remote desktop server system. Even with the warning that the system would not be available for other users, it would still be turned off accidentally by someone.

This would mean either a trip down to the client's location to fire the remote desktop machine up again, or having someone go into the server closet/room to hit the power button on the unit. Remote power cycling PDUs are not necessarily an option.

This also presents a bit of a predicament because all of our clients with the Remote Desktop setup are locked down with limited access to certain individuals within the company.

Our clients that use this solution are quite happy with it. For those with close to 100% laptop saturation, it presents a viable way to securely access their corporate data, as well as their proprietary network applications simply and conveniently from virtually anywhere.

If you need to provide close to 100% anywhere Internet access to the laptop user, EVDO PCMCIA modems work excellently with this particular setup in North America. EVDO provides great speed and coverage versus the alternatives.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

System Builder Tip: Boot from USB drive on Toshiba Satellite P100

It seems that the Toshiba Satellite P100 requires a bit of work to boot from a USB flash drive.

Essentially, you do not see a USB option after hitting F12 on the laptop to get the boot options screen.

From Toshiba:

Attach the Bootable USB Memory Stick and Enter the BIOS Menu (2 ways to enter the BIOS Menu)

1. Press and hold F2 immediately after powering on the unit
2. From the Boot Menu highlight "" and press Enter.

- Use the side arrows to select the "Boot" section.
- Expand the HDD title
- Select the "USB Drive" (name may vary) and move it to the top (F5 and F6 Key)
- Exit Saving Changes
From Toshiba's site: How to boot from a bootable USB memory stick on a Satellite P100.

Keep in mind that other models may also require this methodology.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Friday, 25 May 2007

Microsoft File Transfer Manager - Puzzle

We are TechNet Plus subscribers.

Anything we download via TechNet uses the Microsoft File Transfer Manager.

We had started a download for "Longhorn" server and had to suspend it until after a reboot of the system.

When we came back, there was no way to start up the transfer manager.

A quick search of the Internet that brought us to the Microsoft File Transfer Manager page, pointed to the following folder:


%SystemRoot%\Downloaded Program Files\
But, it isn't there? Or is it?

We don't have a shortcut for it on the desktop, so we went back to the TechNet site and started the download over again.

We were greeted with the MS File Transfer Manager:


There it is, the first download suspended, and the new download. So, cancelled the new download to allow the first one to finish and then followed through on Microsoft's instructions to put a shortcut on the desktop.

Click on the options button and you get:


Click on the, "Place application shortcut on the desktop", Apply and OK.

After the desktop shortcut appears, right click on it and left click on properties.

You will be greeted with:


Okay, click on the Find Target button and low and behold there it is:


What the chicken?!?

Here is a side by side shot of the two "folders" showing the same path:


There is a little puzzle for a Friday afternoon! ;)

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Microsoft SBS Community Survey

If you are involved with the SBS community in any way, take the SBS WW Community Survey.

From the Survey site:
The Windows Small Business Server Product Team would like to hear from the Windows SBS Community. This direct anonymous survey of the Windows SBS Community is brought to you by the Windows SBS Product Team. We want to know how valuable your experience is with the community resources and information that is available to you today as a member of the Windows SBS Community. We also want to know what you think could be done to improve your Windows SBS Community Experience. Please take a couple of minutes to provide us your candid feedback via this survey and let us know what you think.
It will only take a minute or two, and is worthwhile.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

SBS 2K3 Premium - Get SP1 Now ... Last Chance...

Between now and December 31, 2007 you have the ability to order your SBS SP1 CD 3 (ISA 2004) to update SBS RTM to SP1.

Those CDs are not available anywhere else. They were not available via Microsoft's site for the last while either.

Perhaps this was a wake-up call?

With SBS Cougar around the corner, SP1 should be the minimum install on our SBS boxes.

ISA 2004 is a lot easier to manage and work with than ISA 2000. The network perspective that ISA 2004 uses is different than ISA 2000 but the live logging feature is worth it alone. We can see in real time what is passing through our SBS box NICs. Rule creation and management are relatively easy too.

SBS SP 1 Web Page.

SBS 2K3 Standard SP1 component downloads. There is no longer a CD 1 or CD 2, so we need to download the components via the site.

SBS 2K3 Premium RTM must order the SP1 CD:
North America SBS SP1 CD 3.
Europe, Middle East, Africa SBS SP1 CD 3 (Both link to the same page?!?).

Courtesy of the Official SBS Blog and Susan Bradley.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Thursday, 24 May 2007

Windows Vista - Opening Component Services

There is no direct shortcut or icon to open Component Services in Windows Vista.

To do so, run the following:


%windir%\system32\comexp.msc

Found via the MSDN Forums: Component Services.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

Windows Vista - Activation issue after 30 day period expires

We ran into an Activation problem on Windows Vista, or at least we thought it was a problem. ;)

The issue turned out to be a situation where a machine that is being used to test various hardware and software components on Vista hadn't been used in a while.

It was installed with no product key as it wasn't expected to be used beyond a couple of weeks.

When the machine was turned on, we received the following message:
This copy of Microsoft Windows is not genuine.
The online resolution installed the Genuine Advantage tool which also had an error:


The validation service is unable to determine whether this copy of Windows Vista is Genuine.
Of course it isn't, we hadn't inputted a product key when the OS was installed. At least, that was what we figured out as this machine has been sitting for quite a while. It wasn't supposed to be in service anymore as it is one of our Vista test mules.

So, if you get the above errors, then more than likely a product key was not used on the initial installation of the OS and the Activate over the Internet option was unchecked.

You will need to wait for Windows to prompt you for Activation:


As things like the Control Panel will be disabled or very hard to get to. At least in this case, that is what happened. It was tough to get around.

But we did it, and yes ... it was one of those days! ;*)

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists

System Builder Tip: Keep that PS/2 Keyboard Around

We had an interesting situation come up recently.

When we slaved up a failing WD hard drive to our data mule machine running Windows XP Pro SP2, we were not able to cancel out the default disk scan Windows wants to run on the WD.

We had to reboot the system a number of times due to the poor condition of the drive.

The only way we could bypass the scan was to have a PS/2 keyboard plugged in so we could hit the "any key". Right at that point, Windows had disconnected the USB and thus the USB keyboard.

We have seen this on servers as well right at the 34 minute mark of a Windows Server 2003, 2003 SP1, and 2003 R2 install. The USB would get knocked out, and the system would ask for the RAID driver to be accepted right after it. With no PS/2 keyboard, we would have been stuck. The same would be true for the Disk 1 install of SBS.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists