We were fortunate that we had a backup Hyper-V box on stand-by as the one we were going to use choked when starting the SBS VM!
I had test started it prior to the Webinar and it worked! But I made the mistake of importing an ISA VM onto that Hyper-V box to provide an Internet gateway. So, something happened either during or after the import that caused the existing SBS VM to choke.
Chi, you are right and I stand corrected on there being a difference between RAID 0+1 and RAID 1+0. After seeing your comment, I delved into an online search for clarification. The sites I came up with were not absolutely clear on the distinction or even contradicted each other!
So, if anyone has a good link with good animated diagrams explaining the difference betwwen the two, please post them in the comments.
Thanks for catching me on that one Chi! :)
Thanks also to everyone that took the time to e-mail myself or Harry with affirmations! Being new to the Webinar scene and LiveMeeting can be pretty intimidating!
Want more SBS 2008 Webinars, please feel free to make suggestions!
I would love to do more. :)
Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
http://blog.mpecsinc.ca
Sent from an SBS integrated Windows Mobile Phone.
2 comments:
I don't have a handy reference, but 1+0 is a stripe of two mirror sets (mirror, then add stripe is how I remember it) and is most commonly known as RAID-10.
0+1 is a mirror of two stripe sets (stripe, then add mirror) and is less commonly used than 1+0. 0+1 is more common when the controller supports duplexing, whereby you can mirror the stripe sets across controllers. 5+1 (RAID-51) is also a popular choice for duplexing.
The degradation and subsequent rebuild of 1+0 and 0+1 is also quite different. A single drive failure of 1+0 means that only two drives are involved in a rebuild (the failed drive and its mirrored partner), where a single drive failure in 0+1 means that the stripe set is taken offline, leaving a single stripe set for operation and rebuild. That is, all four drives are used in a rebuild.
Ah, found a good one - see the Wikipedia entry on Nested RAID Levels
Chris,
Thanks for that. I will dive into the Wiki entry to see if I can wrap my brain around the differences.
Philip
Post a Comment