Monday, 4 October 2010

Intel Modular Server – MPIO Driver Install Requires Second Reboot

When we are in the process of standing up a new Hyper-V Server 2008 R2 cluster node on the Intel Modular Server we walk through an initial set of OS preparation steps.

One is to install the Intel MPIO driver.

When we do, once the compute module has completed its reboot it will more than likely request another reboot:

image

It’s important to note that the reboot request dialogue box may not show up right away depending on the CPU configuration in the compute modules.

After installing the MPIO driver and logging in once the compute module reboot cycle finishes, give the OS some time to process the changes that have been made. The reboot request should come up then.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Intel DX38BT to DP55KG Caveat – Activate Again

Our main office system decided to die this morning. It has been behaving a little on the strange side with network related communications becoming somewhat spotty. The Outlook connection seemed to receive the quickest impact from whatever was going flaky.

We had ordered in an Intel DP55KG, Intel i7-875K, and a CoolerMaster v8 CPU cooler early last month for the purpose of swapping out the system’s DX38BT, QX9650 C2 Extreme, and Zalman CPU cooler. There never seemed to be enough time to do the swap.

Well, this morning’s death made the swap a necessity.

The component swap went painlessly. After running the Intel PROSet driver update, a chipset update, and a few “New Hardware Found” dialogues and reboots the system came up flawlessly. The dual 80GB X25-M SSDs in a RAID 0 stripe were picked up by the newer version on board software RAID without an issue too.

Windows 7 did not ask to be re-activated as we are running Windows 7 Enterprise x64 throughout our organization.

But, Office 2010 Professional Plus (Open Value) and Adobe Design Suite Premium CS3 both requested to be activated again:

image

image

This hardware swap experience sure contrasts to how things were five, ten, or more years ago. In years past we would be hard pressed to save the OS and applications if we needed to change out the motherboard.

We have come a long way indeed.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Friday, 1 October 2010

Quick IE Search Tips: Blog & MSFT KB Examples

This neat tip comes originally from Mariette Knap which we have modified for our own purposes.

After merging the above registry file we may need to restart all IE session for the change to take.

So, just what does the above do?

Well, let’s say we need to get to the Hyper-V Nehalem hotfix page really quick. Since we know the KB number off by heart we type the following in IE’s address bar:

image

Once we hit the Go arrow or Enter we end up at:

image

Okay, we now have quick access to Microsoft Knowledgebase articles that we know the article number for.

Now, we search our own blog _a lot_ as it is a knowledgebase for us too. Thus, we would love to see:

image

Give us:

image

After tweaking the registry entry a little we figured out how to get the above search results by typing the keyword “mblog” and our search terms.

The registry file can be found here:

Here are a couple screenshots of the registry settings:

Microsoft Knowledgebase Quick Search

image

MPECS Inc. Site:blog.mpecsinc.ca Search

image

These little IE tweaks will save us a huge chunk of time!

Susan Bradley also pointed out the following:

The above would have been very handy to get that link into this blog post! :)

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Thursday, 30 September 2010

Integrating An Intel RAID RS2BL040 Battery Backup AXXRSBBU7 With An Intel Server System SR1630HGPRX

The Intel Server System SR1630HGPRX has a spot on one side of the chassis to mount the Intel RAID Controller’s RAID Smart Battery.

Having the battery unit mounted elsewhere in the chassis is a good idea since having it mounted on the RAID controller itself causes an obstruction to the air flowing towards the RAID controller’s processor heatsink.

Tray Mounting

The plastic tray was a bit of a bear to mount in place:

image

We had to slip the guides in onto the high points of the mounting slot and somehow pivot it into the low point with a good amount of effort required to get the locking mechanism to snap in place. The lock is just above the white plastic zip tie in the above screenshot.

Note the star shaped pin near the bottom right hand side of the tray. One would initially gather that it was meant to guide the battery backup’s PCB board into the proper place. Especially since there looks to be a hole in the PCB board just for that purpose.

In fact, it is not a guide but a stand-off to prevent the PCB board from being pushed too far into the tray. Keep this in mind when mounting the battery and PCB.

Another catch to getting the battery/PCB in is in fact the catches themselves. There is one on either side of the tray’s lock. They provide a significant amount of resistance to getting the PCB to set in place. We needed to be mindful of just how much they were being pulled back while trying to slip the PCB into place.

And one more thing when it comes to the tray and batter/PCB combination, there is a requirement for the battery to sit above the PCB in order for the PCB to catch under the two mounting clips on the tray. The PCB clip that holds the battery down looks large enough to prevent this, but there is enough flex in the PCB itself to get things into place.

All in all, this is one snug fitting trio.

image

Remote PCB and RAID Controller

Once we ran the cable from the battery backup to the RAID controller, we needed to install a small daughter card onto the RAID controller itself.

image

The daughter card, shown above, has the socket that connects to the RAID controller as well as the black pivot pin that is used to set the mounting screw into on the RAID controller. The pivot pin is shown in the correct location above. We needed to loosen the screw on the daughter card and rotate the pivot pin into the correct location prior to installing it onto the RAID controller.

The daughter card installed:

image

After installing the power cable the RAID controller was connected to the PCI-E riser and finally installed in the system.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Wednesday, 29 September 2010

Can’t Download Hyper-V Update Rollup Package 2264080 from Update Catalogue

We saw this update go by on one of our freshly installed Hyper-V Server 2008 R2 nodes:

Now, because the update is available through MU (Microsoft Update), we need to go to the Windows Update Catalogue site to download it separately.

Note that an ActiveX component will need to be installed in the browser in order for the site to work.

image

We input the KB number in the search and get the following result:

image

Click on the view basket (1) link to download the update or updates if additional ones were selected.

image

In our case, we ran Internet Explorer 32-bit as a Standard User on Windows 7 Enterprise x64.

After clicking the Download button we should have seen the following IE window pop up:

image

But, we did not. We saw a similar window in the already existing IE session that would not allow us to do anything. We could not choose a folder at all so things came to a full stop.

We ended up trying to start Internet Explorer in an elevated session (Start –> Internet Explorer –> Right click and credential UAC).

Once we did so we were able to choose a directory to drop the update into:

image

But, when we clicked the Continue button:

image

With IE in an elevated session we were still getting stuck.

We ended up logging into one of our Windows 7 VMs using a domain admin account and doing the following to get it to work:

  1. Open Internet Explorer
  2. Navigate to the Windows Update Catalogue site.
  3. Add the site to the Trusted Sites list.
  4. Close IE.
  5. Open IE and navigate to the Catalogue again.
  6. Search for our needed update.
  7. Add it to the Basket.
  8. Click the Download button.
  9. Choose a directory for the download and click Download.
  10. Click Continue for the UAC prompt.
    • This is what was what was causing the hang.
    • image
  11. Click Close.

image

The reason we are downloading the update as opposed to obtaining it through MU is due to the Nehalem hotfix (KB975530) being included along with a fix for running Hyper-V on the new Westmere CPUs. Since we install the Nehalem update by default on all of our Hyper-V deployments we will now use this RU instead.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

IMS – Cluster NIC Setup Worksheet Available

There are a lot of places that we need to pull little bits of information from when preparing to build a cluster on the Intel Modular Server.

When it comes to NIC configuration there are _a lot_ of steps to walk through in order to team them and subsequently configure the needed VLANs on each team.

We have placed a basic worksheet on our Web site that can be downloaded.

image

Please feel free to use this worksheet as a template for your IMS documentation.

The SAS WWM Initiator IDs are required for configuring a Promise VTrak E-Class RAID storage unit with the IMS based cluster.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Tech Days 2010 Edmonton Presentation On Clustering

I will be doing a Tuesday October 5th presentation at the Edmonton Tech Days 2010 event at 15:40Hrs (3:40PM) on Hyper-V Clustering!

image

The slide deck will be minimal with most of the presentation focused on a live Hyper-V Server 2008 R2 cluster running on an Intel Modular Server setup.

Looking for a Tech Days discount code?

  • MVPInvite

The above will discount the entrance cost to $349. Not a bad deal for two days of technical content with no marketing fluff!

Every Tech Days that I have attended have always had bits and bytes to take away. There are lots of ways to get the creative brain juices flowing, this is definitely one of them.

One such bit was fellow MVP Dana Epp’s (his company site) security presentation a few years ago that included a good discussion on using AZMan (John Howard’s explanation) to manage access permissions on a Hyper-V setup.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Tuesday, 28 September 2010

Blog Template Update

Well, after close to four years of using the same template that we modified for our purposes when we first started out on this endeavour, the blog now has an updated template using one of Blogger’s defaults.

The links and such are now where they belong on the left hand side of the page and the restrictions on images seem to no longer be applied. They can actually be _seen_ at whatever size they were screenshot at.

So, enjoy the new look and feel. It should be easier to read for those of us with eyes starting to show their wear and tear too! ;)

And again, thanks to all of you for your ongoing support and contributions to this blog. Without the comments and encouragement over the years the blog would have died a death a long time ago.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Intel Modular Server LUN Copy Feature

The Intel Modular Server has an add-on ability to copy logical disks (LD) from one storage pool to another on the local IMS SAN.

For our in-house cluster we ran a backup of the SBS v7 public beta VM to a VHD located on our data storage server. If we want to start fresh we can restore that SBS v7 OS to a VM in a short amount of time versus doing a fresh Answer File based install.

While we are preparing to stand up a three node cluster on our IMS we are running a test to see if we can keep that SBS v7’s LD available for the soon-to-be cluster.

But, in the meantime we are looking to restructure some of the IMS’s on board SAN storage. So, we are copying that LD from one storage group to another using the LUN Copy feature (MFSLUNCOPY).

image

The whole process took about 25 minutes for the default SBS v7 OS install which is about 20-25 GB in size. The disk is offline at the moment so an accurate number cannot be had. But, the backup VHD file is currently about 20 GB in size.

All of the IMS local storage hard drives with the exception of bays 1 and 2 are 146 GB Seagate 15K Savvio drives. The first two bays have 160 GB X25-M Intel SSDs in them.

Once the copy has completed we can then went on to delete the source LD:

image

Another use for this feature would be to copy an LD of a Windows 7 desktop OS that has been prepared for production use. We would SysPrep the OS and copy that LD to create as many Windows 7 desktop OSs as was needed.

The Microsoft Desktop Deployment Toolkit would be of great benefit if we have a need for more than a few desktop OS deployments.

Further Reading

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

A Few Promise VTrak Performance Graphs

We managed to bring the Promise VTrak demo unit online with a test cluster yesterday.

We set up a set of logical disks on the unit and configured them to connect to various cluster based VMs.

One LD was used as a data partition for an SBS v7 VM while the others were being used as the OS partition for a set of Windows 7 VMs.

Here are a couple of graphs that were imaged at the beginning of the Windows 7 Enterprise x64 OS installs:

image

The above shows the bandwidth being used right when we were starting.

This screenshot shows what the metrics look like over time. When all four Windows 7 desktop OSs were being installed we saw a fairly consistent 145 MB/Second to 165 MB/Second performance for the All Physical Drive Statistics (middle graph).

image

We have since flattened the cluster and set the VTrak back to factory defaults and are running through a fresh cluster build today.

We will then start the VTrak connection process to run through the set up steps in our in-house guide to make sure we have not made any errors.

From there we will begin testing the throughput on the VTrak via the two Intel Modular Server SCMs by running a series of OS installs and large data copies to storage located on the VTrak.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Saturday, 25 September 2010

Distractions Can Be Costly

This post is born out of a bit of frustration . . . but in a good way.

There is a very good reason why we build comprehensive checklists and make sure that we are documenting our progress through any of the procedures from setting up an SBS 2008 or SBS v7 box to building a very complicated Hyper-V cluster.

There are times where total silence, meaning no music, no talking or conversations, or any other forms of distractions are an absolute must.

Today, while running through the set up of a new cluster there were a number of distractions that jumped in within minutes of each other.

The last step accomplished on node 1 of the soon to be 3 node cluster was to set the IP addresses for the various NIC team VLANs with the following step being the setting of the DNS server for each VLAN.

The error made by me was to be running through the steps following our internal cluster set up guide making notes on its structure and such but not actually _checking off each step_ being done.

The phone rang and it was Monique. Then someone had dropped by seeing that the big door was open a bit to allow cool air into the shop. So, after they were dealt with the following looked just fine:

image

That is the default teamed VLAN structure on the node with the blanked IP being our own subnet.

Well, the final step once all of the IP addresses are set into each VLAN is to IPConfig /RegisterDNS to clean out all of the DHCP delivered IP addresses in DNS.

In our SBS v7 DNS the Heartbeat subnet IP showed up but the IP for our own subnet did not for the Management VLAN.

In the end it took about half an hour or more to realize that the step that was missed was to set the DNS server IP address for the Management VLAN.

The cost was my own assumption that the DNS server IPs were set in the first place . . . instead of putting that checkmark at each completed step as I should.

I am the primary reason that checklists have become an important aspect of how we do business and how we build IT solutions.

All it takes is one skipped step to bring things to a screeching halt or crashing down on a production network!

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Our New Web Site

We were pretty busy this week so we did not have much time to spend on getting our new site online and configured for how we want to use it.

We are happy to say that the site is now online and configured with the basic foundation (no pun intended) we will be building the site on.

image

Our plans for the site are not too monumental! :)

Though, as time permits we will be developing the following site features:

  • MPECS Inc. Technical Wiki
    • Since the blog has grown quite a lot since it was started we will build this Wiki up to focus in on current projects and products that we work with.
  • MPECS Inc. Free Downloads
    • Content from Intel server configurations that we have designed for our client deployments through to product documentation.
  • MPECS Inc. Calendar
    • Any public events that we will be attending or participating in.

We intend to keep the Wiki as focused as possible on current IT based solutions that we are working with at the time.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Thursday, 23 September 2010

SBS v7 Beta Available for Download

The new SBS v7 beta can be found here:

After registration the download is about 6.5 GB in size so it may take a while to get there.

We will be migrating our network off of the current NDA copy we have been using for a month or so onto this new version very shortly.

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Wednesday, 22 September 2010

Dell iDRAC6 Enterprise Required For Remote Console/KVM

Dell has restructured their DRAC (Dell Remote Access Controller) model features.

On DRAC version 5 remote console KVM redirection was included out of the box.

With the advent of iDRAC6 we now see two versions of the product:

  1. iDRAC6 Express
  2. iDRAC6 Enterprise

Since out-of-band remote console KVM access is absolutely critical for those of us that manage a lot of servers at remote locations, we need to be absolutely sure that the server’s remote access product meets our needs.

We will be quoting some information from the following Dell document:

On page 49 we find a comparison between the iDRAC6 Express and the iDRAC6 Enterprise products:

image

Note bullet item number 2 under iDRAC6 Enterprise states:

  • Remote video, keyboard, and mouse control with Virtual Console.

So, we now know that all of our remote clients that order Dell servers must have the iDRAC6 Enterprise product installed on the box to give us full out-of-band BMC and console access.

Why Out-Of-Band Access?

We require an iDRAC, DRAC, RMM3, iLO with Advanced license, and other out-of-band management abilities on our remote servers for some of the following reasons:

  • We can fully recover a server by booting to OS DVD or USB flash and restoring from attached backup without client intervention.
  • We can manage the server from the console (sitting at the keyboard and mouse) when running updates so we don’t lose our connection via RWW or TS/RDS Gateway.
  • We can remotely power cycle a server that has an OS that is not responding.
  • We can remotely update server component’s firmware.

Essentially, with an out-of-band management device we have the same access to the box as we would if we were standing in the room with it.

Further reading:

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer

Bootable USB: Windows 7 USB/DVD Download Tool

In a conversation about creating a bootable USB flash drive the following tool was mentioned:

Once we download and install the tool we are good to go.

When we run the tool we must choose our source ISO.

image

After choosing our Windows 7 Enterprise x64 ISO file in the step above we can choose our destination:

image

We will use the 8 GB OCZ Rally2 Turbo USB flash drive that we used for yesterday’s post on creating a bootable USB flash drive.

image

Once we click the Begin copying button the following happens:

image

  • The USB flash drive gets formatted.

image

  • It then copies the OS contents onto the drive.

 image

Once the process has completed our 8 GB USB flash drive looks like this in our Windows 7 Disk Management console:

image

It is formatted NTFS and set to Active so it is indeed good to go!

Hat Tip: Les Connor SBS MVP (Bing Search)

Philip Elder
MPECS Inc.
Microsoft Small Business Specialists
Co-Author: SBS 2008 Blueprint Book

*Our original iMac was stolen (previous blog post). We now have a new MacBook Pro courtesy of Vlad Mazek, owner of OWN.

Windows Live Writer